OS GSO ISO 7096:2011

ISO 7096:2000
Omani Standard   Current Edition · Approved on 12 October 2011

Earth-moving machinery -- Laboratory evaluation of operator seat vibration

OS GSO ISO 7096:2011 Files

English 21 Pages
Current Edition Reference Language
OMR 62.31

OS GSO ISO 7096:2011 Scope

1.1 This International Standard specifies, in accordance with ISO 10326-1, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines. 1.2 This International Standard is applicable to operator seats used on earth-moving machines as defined in ISO 6165. 1.3 This International Standard defines the input spectral classes required for the following earth-moving machines. Each class defines a group of machines having similar vibration characteristics: — rigid frame dumpers > 4 500 kg operating mass1) — articulated frame dumpers — scrapers without axle or frame suspension2) — wheel-loaders > 4 500 kg operating mass1) — graders — wheel-dozers — soil compactors (wheel type) — backhoe-loaders — crawler loaders — crawler-dozers ≤ 50 000 kg operating mass1),3) — compact dumpers ≤ 4 500 kg operating mass1) — compact loaders ≤ 4 500 kg operating mass1) — skid-steer loaders ≤ 4 500 kg operating mass1) 1.4 The following machines impart sufficiently low vertical vibration inputs at frequencies between 1 Hz and 20 Hz to the seat during operation that these seats do not require suspension for the attenuation of transmitted vibration: — excavators, including walking excavators and cable excavators4) — trenchers — landfill compactors — non-vibratory rollers — milling machines — pipelayers — finishers — vibratory rollers 1.5 The tests and criteria defined in this International Standard are intended for operator seats used in earthmoving machines of conventional design. NOTE Other tests may be appropriate for machines with design features that result in significantly different vibration characteristics. 1.6 Vibration which reaches the operator other than through his seat, for example that sensed by his feet on the platform or control pedals or by his hands on the steering-wheel, is not covered.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ISO 10972-1:2026
ISO 10972-1:2025 
Gulf Standard
Cranes — Requirements for mechanisms — Part 1: General
GSO ISO 7141:2026
ISO 7141:2022 
Gulf Standard
Road vehicles — Light alloy wheels — Lateral impact test
GSO ISO/TS 7815-1:2026
ISO/TS 7815-1:2025 
Gulf Standard
Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 1: Secure vehicle interface framework and architecture
GSO ASTM D8002:2026
ASTM D8002:24 
Gulf Standard
Standard Test Method for Modified Fouling Index (MFI-0.45) of Water